Notice regarding processing of personal data

DATA CONTROLLER

Allu’s S.p.A Unipersonale, Via Giotto di Bondone, 79/A – 33079 Sesto al Reghena (PN) FISCAL CODE: 06194590011 VAT NUMBER: IT 01373550936

RESPONSABILE DELLA PROTEZIONE DEI DATI PERSONALI

The Data Controller has appointed a data protection officer who can be contacted at the e-mail address: dpo@allus.it
Data relating to identified or identifiable natural and/or legal persons may be processed subsequent to researching this site.

WHERE THE DATA ARE PROCESSED

Processing connected to the web services of this site take place at the aforementioned office and are handled exclusively by personnel in charge of the processing, or by persons in charge of occasional maintenance and secretarial operations. The data released may be communicated to third parties in relation to services performed for the data controller; these subjects will be appointed on the basis of art. 28 of EU Reg. 2016/679 responsible for the processing.

TYPES OF DATA PROCESSED

Browsing data: The computer systems and software procedures used to operate this website acquire, during their normal operation, some personal data whose transmission is implicit in the use of Internet communication protocols. This is information which is not collected to be associated with identified interested parties, but which by its very nature could, through processing and association with data held by third parties, allow users to be identified. This category of data includes the IP addresses or domain names of the computers used by users who connect to the site, the addresses in URI (Uniform Resource Identifier) notation of the requested resources, the time of the request, the method used to submit the request to the server, the size of the file obtained in response, the numerical code indicating the status of the response given by the server (successful, error, etc.) and other parameters relating to the operating system and the user’s IT environment. These data are used for the sole purpose of obtaining anonymous statistical information on the use of the site and to check its correct functioning and are cancelled immediately after processing. The data could be used to ascertain responsibility in the event of hypothetical computer crimes against the site.

Data provided voluntarily by the user: the optional, explicit and voluntary sending of e-mails to the addresses indicated on this site involves the subsequent acquisition of the sender’s address, needed to answer requests, as well as any other personal data in the contact form. Specific information will be progressively reported or displayed on the pages of the site set up for particular services on request. The personal data disclosed in the contact section will be used to proceed with a subsequent telephone or e-mail contact of the Company concerned for the purpose of an estimate and pre-contractual activities pursuant to art. 6 letter b) of EU Reg. 2016/679. Express consent of the data subject is, on the other hand, required for subscribing to the newsletter and update service (Article 6, letter a) of EU Reg. 2016/679) as well as for personalized communications.

Cookies: This section of the sites sends some files commonly known as cookies to visitors. The cookies will be used by the computer browser, exclusively to store the session information of the website user. The use of cookies is an industry standard and browsers store them in a special folder. If you prefer not to receive cookies or want to be informed in advance, you can set your web browser accordingly for browsing the internet. We would like to however inform you that if this function is not active you cannot access the forum section correctly on the Company’s websites. For further information on cookies

OPTIONALITY OF PROVIDING DATA

In addition to what has been specified above regarding browsing data, the user is free to provide personal data in request forms, reserved registration areas or in any case indicated in contacts. Non provision of such data may however bring about the impossibility to supply what has been requested. Specific notices will express when the consent of the interested party is required and the interested party will be informed of the ways in which he/she can revoke a previously expressed consent.

PROCESSING METHODS

Personal data are processed with IT tools for the time strictly needed to achieve the purposes for which they were collected, and are compared with those which the data controller may already possess to carry out activities or services. In case of discrepancy, the person in charge can contact the sender to verify the integrity of the data or provide for its possible correction. Specific security measures are taken to prevent the loss, unlawful or incorrect use of data and unauthorized accesses.

FURTHER INFORMATION ON PROCESSING

Defence before the courts
The User’s personal data can be used for the defence by the Data Controller in court or in the preparatory stages of the commencement of legal proceedings, against claims regarding processing of personal data or connected services by the User.
The User declares to be aware that the Data Controller may be required to disclose data at the request of public authorities.

Specific notices
Upon the User’s request, this Site could provide the User with additional and contextual information regarding specific services, or the collection and processing of Personal Data in addition to the information contained in this privacy policy.

System log and maintenance
For needs related to operation and maintenance, this site and any third party services used by it may collect system logs, i.e. files that record interactions and which may also contain personal data, such as the user’s IP address.

Retention period
Personal data will be stored in compliance with legal obligations and as strictly connected to the purposes of the processing.

Recipients of the data
Personal data will not be disclosed. The personal data provided for the purchase and order of products can be communicated to

subjects to whom this communication must be made in order to fulfill or to require the fulfillment of specific obligations established by laws, regulations and/or community legislation;
the companies of the Gabrielli Group which deal with the requested service;
external natural and/or legal persons who provide services instrumental to the activities of the Data Controller (e.g. call centres, suppliers, consultants, companies, institutions, professional firms). These subjects will operate as data processors.

Information which this policy does not contain
More information regarding the processing of personal data can be requested at any time to the Data Controller by using the contact information.

USERS’ EXERCISE OF RIGHTS

The subjects to whom the personal data refer have the right at any time to receive a confirmation of the existence or non existence of such data at the Data Controller’s premises, to know the content and origin, to verify its accuracy or request its integration, deletion, update, correction, transformation into anonymous form or blocking of data processed in violation of the law, as well as to oppose in any case, for legitimate reasons, their processing. Requests must be addressed to the Data Controller who can be contacted at the email address privacy@allus.it. Claims can be lodged with the Privacy Supervisor for the protection of personal data (www.garanteprivacy.it)

Alloys	Temper	Tensile strength Rm (Mpa)	Yield strength Min. Rp0,2 (Mpa)	Elongation min. %**	Electrical conductivity (MS/m)
1050A	O	65-95	20	22	34,5
	H12	85-125	65	4
	H14	105-145	85	3
	H16	120-160	100	2
	H18	140 Min	120	2
	H19	150 Min	130	1
1070A	O	60-90	15	25	35,4
1200	O	75-105	25	21
	H12	95-135	75	4
	H14	115-155	95	3
	H16	130-170	115	2
	H18	150 Min	130	2
	H19	160 Min	140	1
*1350A	O	65-105	20	22	35,4
*1370A	O	65-105	20	22	35,8

Alloys	Temper	Tensile strength Rm (Mpa)	Yield strength Min. Rp0,2 (Mpa)	Elongation min. %**
3003	O	95-135	35	17
	H22	120-160	80	4
	H24	145-185	115	4
	H26	170-210	140	3
	H18	190 Min	170	2
	H19	210 Min	180	2
3103	O	90-130	35	19
	H22	115-155	75	7
	H24	140-180	110	4
	H26	160-200	135	3
	H18	185 Min	165	2
	H19	200 Min	175	2
3005	O	115-165	45	14
	H22	145-195	110	5
	H24	170-215	130	4
	H26	195-240	160	3
	H18	220 Min	200	2
3105	O	100-155	40	15
	H22	130-180	105	6
	H24	150-200	120	4
	H26	175-225	150	3
	H18	195 Min	180	1

Alloys	Temper	Tensile strength Rm (Mpa)	Yield strength Min. Rp0,2 (Mpa)	Elongation min. %**
5005	O	100-145	35	19
	H22/H32	125-165	80	5
	H24/H34	145-185	110	4
	H26/H36	165-205	135	3
	H18	185 Min	165	2
	H19	205 Min	185	2
5049	O	190-240	80	14
	H22/H32	220-270	130	8
	H24/H34	240-280	160	6
	H26/H36	265-305	190	4
	H18	290 Min	250	2
5052	O	170-215	65	14
	H22/H32	210-260	130	6
	H24/H34	230-280	150	5
	H26/H36	250-300	180	4
	H18	270 Min	240	2
5083	O	275-350	125	12
	H22/H32	305-380	215	6
	H24/H34	340-400	250	5
	H26/H36	360-420	280	3
5086	O	240-310	100	12
	H22/H32	275-335	185	6
	H24/H34	300-360	220	5
	H26/H36	325-385	250	3
	H18	345Min	290	1
5754	O	190-240	80	14
	H22/H32	220-270	130	8
	H24/H34	220-270	130	8
	H26/H36	240-280	190	3
	H18	240-280	160	6
5182	O	255-315	110	12

Alloy nomination		Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Ga	Observations	Others		Aluminium min.
Numerical	Chemical symbols	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Ga	Observations	Each	Total	Aluminium min.
EN AW-1080A	EN AW-AI 99,8(A)	0,15	0,15	0,03	0,02	0,02	–	0,06	0,02	0,03	–	0,02	–	99,8
EN AW-1070A	EN AW-Al 99,7	0,20	0,25	0,03	0,03	0,03	–	0,07	0,03	–	–	0,03	–	99,7
EN AW-1370	EN AW-Al 99,7	0,10	0,25	0,02	0,01	0,02	0,01	0,04	–	0,03	0,02B ; 0,02V + Ti	0,02	0,1	99,7
EN AW-1050A	EN AW-AI 99,5	0,25	0,40	0,05	0,05	0,05	–	0,07	0,05	–	–	0,03	–	99,5
EN AW-1350A	EN AW-Al 99,5 (A)	0,25	0,40	0,02	–	0,05	–	0,05	–	–	0,03Cr+Mn+Ti+V	0,03	–	99,5
EN AW-1100	EN AW-Al 99,0Cu	0,95 Si+Fe		0,05-0,20	0,05	–	–	0,1	–	–	–	0,05	0,15	99
EN AW-1200	EN AW-AI 99,0	1,00 Si+Fe		0,05	0,05	–	–	0,1	0,05	–	–	0,05	0,15	99
EN AW-1200A	EN AW-AI 99,0A	1,00 Si+Fe		0,1	0,3	0,3	0,1	0,1	–	–	–	0,05	0,15	99
EN AW-3003	EN AW-AI Mn1Cu	0,6	0,7	0,05-0,20	1,0-1,5	–	–	0,1		–	–	0,05	0,15	*
EN AW-3103	EN AW-AI Mn1	0,50	0,7	0,1	0,9-1,5	0,3	0,1	0,2		–	0,10Zr+Ti	0,05	0,15	*
EN AW-3005	EN AW-AI Mn1Mg0,5	0,6	0,7	0,3	1,0-1,5	0,20-0,6	0,1	0,25	0,1	–	–	0,05	0,15	*
EN AW-3105	EN AW-AI Mn0,5Mg0,5	0,6	0,7	0,3	0,30-0,8	0,20-0,8	0,2	0,4	0,1	–	–	0,05	0,15	*
EN AW-5005A	EN AW-AI Mg1(C)	0,30	0,45	0,05	0,15	0,7-1,1	0,1	0,2		–	–	0,05	0,15	*
EN AW-5049	EN AW-AI Mg2Mn0,8	0,40	0,50	0,1	0,50-1,1	1,6-2,5	0,3	0,2	0,1	–	–	0,05	0,15	*
EN AW-5251	EN AW-AI Mg2	0,40	0,50	0,15	0,10-0,50	1,7-2,4	0,15	0,15	0,15	–	–	0,05	0,15	*
EN AW-5052	EN AW-AI Mg2,5	0,25	0,40	0,1	0,1	2,2-2,8	0,15-0,35	0,1		–	–	0,05	0,15	*
EN AW-5754	ENAW-AI Mg3	0,40	0,40	0,1	0,5	2,6-3,6	0,3	0,2	0,15	–	0,10-0,6 Mn+Cr	0,05	0,15	*
EN AW-5083	EN AW-AI Mg4,5Mn0,7	0,40	0,40	0,1	0,40-1,0	4,0-4,9	0,05-0,25	0,25	0,15	–	–	0,05	0,15	*
EN AW-5086	EN AW-AI Mg4	0,40	0,50	0,1	0,20-0,7	3,5-4,5	0,05-0,25	0,25	0,15	–	–	0,05	0,15	*
EN AW-5182	EN AW-Al Mg4,5Mn0,4	0,20	0,35	0,15	0,20-0,50	4,0-5,0	0,1	0,25	0,1	–	–	0,05	0,15	*

Alloy		Mechanical properties (EN 1592-2)				Chemical composition (EN 573-3)
		Temper	Rm N/mm2	Rp 0,2 N/mm2	A5 %	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Other
EN AW-3004	EN AW-AL Mn1 Mg1	H125 H145 H165 H185	190 220 240 250	145 180 200 220	8 6 4 3	≤ 0,30	≤ 0,70	≤ 0,25	1,00 ÷ 1,50	0,8 ÷ 1,30		≤ 0,25
EN AW-3005	EN AW-AL Mn1 Mg0,5	H145 H165 H185	200 210 220	175 185 195	7 5 4	≤ 0,60	≤ 0,70	≤ 0,30	1,00 ÷ 1,50	0,20 ÷ 0,60	≤ 0,10	≤ 0,25	≤ 0,10
EN AW-5049	EN AW-AL Mg2 Mn0,8	H125 H145 H165 H185	220 235 250 270	170 200 230 250	10 7 5 3	≤ 0,40	≤ 0,50	≤ 0,10	0,50 ÷ 1,10	1,60 ÷ 2,50	≤ 0,30	≤ 0,20	≤ 0,10
EN AW-5251	EN AW-AL Mg2	H125 H145 H165	210 230 245	160 190 210	8 6 5	≤ 0,40	≤ 0,50	≤ 0,15	0,10 ÷ 0,50	1,70 ÷ 2,40	≤ 0,15	≤ 0,15	≤ 0,15
EN AW-5754	EN AW-AL Mg3	H125 H165	220 255	170 225	9 4	≤ 0,40	≤ 0,40	≤ 0,10	≤ 0,50	2,60 ÷ 3,60	≤ 0,30	≤ 0,20	≤ 0,15	Mn+Cr 0,10 ÷ 0,60
EN AW-5083	EN AW AL Mg4,5 Mn0,7	H185	420	380	4	≤ 0,40	≤ 0,40	≤ 0,10	0,40 ÷ 1,00	4,00 ÷ 4,90	0,05 ÷ 0,25	≤ 0,25	≤ 0,15
EN AW-5086	EN AW-AL Mg4	H125 H145 H165 H185	270 300 320 350	170 220 260 320	9 7 5 3	≤ 0,40	≤ 0,50	≤ 0,10	0,20 ÷ 0,70	3,50 ÷ 4,50	0,05 ÷ 0,25	≤ 0,25	≤ 0,15
EN AW-7075	EN AW-AL Zn5,5 MgCu	0	190	100	15	≤ 0,40	≤ 0,50	1,20 ÷ 2,00	≤ 0,30	2,10 ÷ 2,90	0,18 ÷ 0,28	5,10 ÷ 6,10	≤ 0,20

DATA CONTROLLER

RESPONSABILE DELLA PROTEZIONE DEI DATI PERSONALI

WHERE THE DATA ARE PROCESSED

TYPES OF DATA PROCESSED

OPTIONALITY OF PROVIDING DATA

PROCESSING METHODS

FURTHER INFORMATION ON PROCESSING

USERS’ EXERCISE OF RIGHTS

Circular tubes

Shaped tubes

Flatness tolerance

Mill lenght

Cut lenght

Alloys	Characteristics	Applications
1050A 1070A 1100 1200	Commercially pure aluminium, excellent corrosion resistance, good workability in the annealed condition.	Chemical industry – food industry – aerosol – heat exchangers – lithographic – strip-decorative panels – kitchenware – fine sheet – automotive industry.
1050A / 1070A 1350A / 1370A	Good electrical conductivity in the annealed condition.	Eletrical transformers.
3003 3103 3105	Manganese alloys, good corrosion resistence, good workability, mechanical properties higher than those of pure aluminium.	Heat exchangers – kitchenware – car radiators – false ceiling systems – decorative panels – nuts and bolts signposts – chemical industry – automotive industry.
3005	Magnesium – manganese alloy, good corrosion resistance, good workability, mechanical properties higher than those of pure aluminium.	Furniture – false ceiling systems – aerials – rolling shutters automotive industry.
5005	Magnesium alloy, mechanical properties higher than those of pure aluminium.	Furniture – false ceiling systems – panel surfacing and linings – automotive industry.
5049 5052 5083 5086 5754	Magnesium alloys, excellent workability in the annealed condition but they work harden very quickly in cold manipulation. Suitable for welding and with excellent corrosion resistance, even in sea air.	Chemical industry – food industry – carpentry – structural metal work – insulation – mouldings – land and sea transport seam welded tubes – venetian blinds – pressure vessels automotive industry.
5182	Magnesium alloy, suitable for welding, corrosion resistance high mechanical properties.	Automotive industry

Alloy	Temper	Resistence to corrosion			Aptitude for surface treatements			Moulding			Welding
Alloy	Temper	Normal atmospheres	Marine atmospheres	Tension corrosion	Aptitude for brightness	Protective anodizing	Decorative anodizing	Cold bending	Drawing	Tool manipulation	In gas	Per resistence
1002	O	O	B	O	B	O	B	O	O	I	B	B
1050A	H24	O	B	O	O	O	B	B	B	S	B	B
	H18	O	B	O	O	O	B	S	I	S	B	B
3103	O	O	B	O	B	O	B	O	O	I	O	O
	H24	O	B	O	O	O	B	B	B	S	O	O
	H18	O	B	O	O	O	B	S	I	S	O	O
5005	O	B	B	O	S	B	B	O	O	I	B	B
	H34	B	B	O	B	B	B	B	B	S	B	B
	H36	B	B	O	O	B	B	S	S	S	B	B
	H18	B	B	O	O	B	B	S	S	S	B	B
5052	O	O	O	O	S	B	B	B	B	I	O	O
	H34	O	O	O	B	B	B	S	S	S	O	O
	H18	O	O	O	O	B	B	I	I	B	O	O
5754	O	O	O	O	S	B	B	B	B	S	O	O
	H34	O	O	O	B	B	B	S	S	S	O	O
	H36	O	O	O	O	B	B	S	S	B	O	O
5154B	O	O	O	O	B	B	B	B	B	S	B	B
	H34	O	O	O	B	B	B	S	S	B	B	B
	H36	O	O	O	B	B	B	I	I	B	B	B
5083	O	B	B	B				B		B	BB
6082	O	B	B	O	B	O	B	O	O	S	B	B
	T4	O	B	B	O	O	O	B	S	B	B*	B*
	T6	O	B	O	O	O	O	S	I	O	B*	B*
7020	T6	S	S	S	O	B	S	S	I	B	O**	O**
7075	O	I	I	I	B	S	S	I	I	B	B**	B**
	T6	I	I	I	S	S	S	I	I	B	B**	B**

O = Excellent	S = Good enough	* With mechanical properties decreasing.	* * With partial recovery of mechanical properties.
B = Good	I = Not good enough

External dimensions	Thickness (mm)
HALF OVALS
External dimensions	0,7	0,8	0,9	1,0	1,1	1,2	1,3	1,4	1,5	1,6	1,7	1,75	1,8	1,9	2,0
A x B (mm)	Weight (g/ml)
21,7 x 19	132	151	169	187	204	222	239	257	274	290	307	315	324	340	356
50 x 25	257	293	329	365	400	436	471	506	541	575	610	627	644	678	713
Weights (g/m) are calculated assuming specific gravity to be equal to 2.7 and are indicative only.

External dimensions	Thickness (mm)
OVALS
External dimensions	0,7	0,8	0,9	1,0	1,1	1,2	1,3	1,4	1,5	1,6	1,7	1,75	1,8	1,9	2,0
A x B (mm)	Weight (g/ml)
18,4 x 9	85	96	108	119	130	140	151	162	172	182	192	197	202	211	221
20 x 15	103	117	131	144	158	171	184	197	210	223	235	241	247	259	271
23 x 14	121	137	153	170	186	202	217	233	248	263	278	286	293	308	322
27,5 x 14,7	132	151	169	187	204	222	239	257	274	290	307	315	324	340	356
30 x 15	144	164	184	204	223	242	261	280	299	318	336	345	354	372	390
30,2 x 17,2	150	171	192	212	232	252	272	292	312	331	350	360	369	388	407
33 x 20	162	185	207	229	251	273	294	316	337	358	379	390	400	421	441
35 x 20	174	198	222	246	270	293	316	340	363	385	408	419	431	453	475
36 x 18	174	198	222	246	270	293	316	340	363	385	408	419	431	453	475
40 x 12,1	174	198	222	246	270	293	316	340	363	385	408	419	431	453	475
40 x 20	192	219	245	271	298	324	350	375	401	426	451	464	476	501	526
50 x 10	210	239	268	297	326	354	383	411	439	467	495	508	522	550	577
45 x 25	221	252	283	314	344	375	405	435	464	494	523	538	553	582	611
48 x 19,8	221	252	283	314	344	375	405	435	464	494	523	538	553	582	611
54 x 10,15	221	252	283	314	344	375	405	435	464	494	523	538	553	582	611
48 x 25	233	266	298	331	363	395	427	458	490	521	552	568	583	614	645
Weights (g/m) are calculated assuming specific gravity to be equal to 2.7 and are indicative only.

External dimensions	Thickness (mm)
ELLIPTICALS
External dimensions	0,6	0,7	0,8	0,9	1	1,2	1,5	1,8	2,0	2,5
A x B (mm)	Weight (g/ml)
26 x 18		126	144	161	178	212	261	308	339	414
28 x 20		144	164	184	204	242	299	354	390	477
33 x 26		174	198	222	246	293	363	431	475	583
37 x 22,1		180	205	230	254	303	375	446	492	604
40 x 20		186	212	237	263	314	388	461	509	626
40 x 26		198	225	253	280	334	414	492	543	668
Weights (g/m) are calculated assuming specific gravity to be equal to 2.7 and are indicative only.

External dimensions		Thickness (mm)
SQUARES
External dimensions		0,7	0,8	0,9	1,0	1,1	1,2	1,3	1,4	1,5	1,6	1,7	1,75	1,8	1,9	2,0
A x B (mm)	r (mm)	Weight (g/ml)
10 x 10	r. 1,5	67	76	85	93	102	110	118	126	134
12 x 12	r. 1	85	96	108	119	130	140	151	162	172
12,3 x 12,3	r. 1,5	85	96	108	119	130	140	151	162	172
14 x 14	r. 1,5	103	117	131	144	158	171	184	197	210	223	235	241	247	259	271
15 x 15	r. 1,5	109	124	138	153	167	181	195	209	223	236	249	256	263	276	288
16 x 16	r. 2,5	115	130	146	161	176	191	206	221	235	250	264	271	278	292	305
16,5 x 16,5	r. 1,5	121	137	153	170	186	202	217	233	248	263	278	286	293	308	322
18 x 18	r. 2	126	144	161	178	195	212	228	245	261	277	293	301	308	324	339
20 x 20	r. 1,5	144	164	184	204	223	242	261	280	299	318	336	345	354	372	390
22 x 22	r. 2,5	162	185	207	229	251	273	294	316	337	358	379	390	400	421	441
25 x 25	r. 3,5	174	198	222	246	270	293	316	340	363	385	408	419	431	453	475
30 x 30	r. 3		246	276	305	335	364	394	423	452	480	509	523	537	566	594
30 x 30	r. 4		239	268	297	326	354	383	411	439	467	495	508	522	550	577
40 x 40	r. 2				416	456	497	537	577	617	657	696	716	736	775	814
Weights (g/m) are calculated assuming specific gravity to be equal to 2.7 and are indicative only.

External dimensions		Thickness (mm)
RECTANGULARS
External dimensions		0,7	0,8	0,9	1,0	1,1	1,2	1,24	1,3	1,4	1,5	1,6	1,7	1,75	1,8	1,9	2,0
A x B (mm)	r (mm)	Weight (g/ml)
15 x 10	r. 2	85	96	108	119	130	140	145	151	162	172
18 x 12	r. 1,5	109	124	138	153	167	181	187	195	209	223	236	249	256	263	276	288
18,3 x 12,3	r. 1,5	109	124	138	153	167	181	187	195	209	223	236	249	256	263	276	288
20 x 10	r. 1,5	109	124	138	153	167	181	187	195	209	223	236	249	256	263	276	288
20 x 15	r. 1,5	126	144	161	178	195	212	218	228	245	261	277	293	301	308	324	339
25 x 10	r. 2	126	144	161	178	195	212	218	228	245	261	277	293	301	308	324	339
25 x 12	r. 1,5	132	151	169	187	204	222	229	239	257	274	290	307	315	324	340	356
25 x 15	r. 1,5	144	164	184	204	223	242	250	261	280	299	318	336	345	354	372	390
24 x 18	r. 2,5	147	167	187	207	227	246	254	266	285	304	323	342	351	360	379	397
29 x 18	r. 3	162	185	207	229	251	273	281	294	316	337	358	379	390	400	421	441
32 x 15	r. 4	162	185	207	229	251	273	281	294	316	337	358	379	390	400	421	441
30 x 15	r. 1,5	162	185	207	229	251	273	281	294	316	337	358	379	390	400	421	441
30 x 20	r. 3,5	174	198	222	246	270	293	302	316	340	363	385	408	419	431	453	475
30 x 22,57	r. 6	174	198	222	246	270	293	302	316	340	363	385	408	419	431	453	475
33 x 20	r. 4,5		205	230	254	279	303	313	328	352	375	399	423	434	446	469	492
36 x 18	r. 4,5		212	237	263	288	314	324	339	363	388	413	437	449	461	485	509
33 x 20	r. 3,5		212	237	263	288	314	324	339	363	388	413	437	449	461	485	509
33 x 20	r. 3		219	245	271	298	324	334	350	375	401	426	451	464	476	501	526
33 x 20	r. 2		225	253	280	307	334	345	361	387	414	440	466	479	492	517	543
35 x 20	r. 3,5		219	245	271	298	324	334	350	375	401	426	451	464	476	501	526
35 x 20	r. 2		225	253	280	307	334	345	361	387	414	440	466	479	492	517	543
35 x 24	r. 4		239	268	297	326	354	366	383	411	439	467	495	508	522	550	577
40 x 20	r. 4		239	268	297	326	354	366	383	411	439	467	495	508	522	550	577
40 x 20	r. 3		246	276	305	335	364	376	394	423	452	480	509	523	537	566	594
40 x 22	r. 4,5		246	276	305	335	364	376	394	423	452	480	509	523	537	566	594
40 x 22,5	r. 6		246	276	305	335	364	376	394	423	452	480	509	523	537	566	594
40 x 25	r. 3		266	298	331	363	395	408	427	458	490	521	552	568	583	614	645
40 x 30	r. 3		286	321	356	391	425	439	460	494	528	562	596	612	629	662	696
43 x 20	r. 4,5		252	283	314	344	375	387	405	435	464	494	523	538	553	582	611
43 x 20	r. 3		266	298	331	363	395	408	427	458	490	521	552	568	583	614	645
45 x 20	r. 3		266	298	331	363	395	408	427	458	490	521	552	568	583	614	645
45 x 22	r. 2,5		280	314	348	382	415	429	449	482	515	548	581	597	614	646	679
45 x 30	r. 4,5		300	337	373	410	446	460	482	518	553	589	624	642	660	695	729
46 x 20	r. 3,5		266	298	331	363	395	408	427	458	490	521	552	568	583	614	645
46 x 22	r. 3		286	321	356	391	425	439	460	494	528	562	596	612	629	662	696
46 x 22	r. 6,5		266	298	331	363	395	408	427	458	490	521	552	568	583	614	645
47,6 x 21,6	r. 5			314	348	382	415	429	449	482	515	548	581	597	614	646	679
50 x 20	r. 3,5			321	356	391	425	439	460	494	528	562	596	612	629	662	696
50 x 20	r. 5			314	348	382	415	429	449	482	515	548	581	597	614	646	679
50 x 22	r. 2,5				373	410	446	460	482	518	553	589	624	642	660	695	729
50 x 25	r. 3				382	419	456	471	493	530	566	603	639	657	675	711	746
50,3 x 20,5	r. 4				356	391	425	439	460	494	528	562	596	612	629	662	696
50 x 30	r. 2				416	456	497	513	537	577	617	657	696	716	736	775	814
56 x 20	r. 2,5				399	438	476	492	515	553	592	630	668	687	705	743	780
58 x 25	r. 2,5				433	475	517	534	559	601	643	684	725	746	766	807	848
60 x 20	r. 2				416	456	497	513	537	577	617	657	696	716	736	775	814
60 x 24	r. 5				424	466	507	523	548	589	630	670	711	731	751	791	831
60 x 25	r. 3,5				441	484	527	544	570	613	655	698	740	761	782	824	865
60 x 30	r. 4,5				458	503	548	565	592	637	681	725	769	790	812	856	899
61,5 x 20	r. 4				416	456	497	513	537	577	617	657	696	716	736	775	814
61,7 x 24,7	r. 4				441	484	527	544	570	613	655	698	740	761	782	824	865
64 x 25	r. 3,5						548	565	592	637	681	725	769	790	812	856	899
64 x 25	r. 2,5						558	576	603	648	693	738	783	805	828	872	916
66 x 22	r. 2,5						548	565	592	637	681	725	769	790	812	856	899
67,7 x 24,7	r. 4						568	586	614	660	706	752	797	820	843	888	933
71,5 x 20	r. 2,5						568	586	614	660	706	752	797	820	843	888	933
73 x 25	r. 4,5						599	618	647	696	744	793	841	865	889	936	984
77 x 25	r. 3,5						629	650	680	732	782	833	884	909	934	985	1035
82 x 20	r. 4						629	650	680	732	782	833	884	909	934	985	1035
84 x 25	r. 2,5						680	702	736	791	846	901	956	983	1011	1065	1120
Weights (g/m) are calculated assuming specific gravity to be equal to 2.7 and are indicative only.

External dimensions	Thickness (mm)
ROUNDS
External dimensions	0,6	0,7	0,8	0,9	1	1,1	1,2	1,3	1,4	1,5	1,6	1,7	1,75	1,8	1,9	2,0
D (mm)	Weight (g/ml)
6	27	31
8	38	43	49	54	59
10	48	55	62	69	76
12	58	67	76	85	93	102	110	118	126	134
12,7	62	71	81	90	99	108	117	126	134	143
13	63	73	83	92	102	111	120	129	138	146
14	68	79	90	100	110	120	130	140	150	159
15	73	85	96	108	119	130	140	151	162	172
16	78	91	103	115	127	139	151	162	173	184	195	206	212	217	227	238
17	83	97	110	123	136	148	161	173	185	197	209	221	226	232	243	254
17,3	85	99	112	125	138	151	164	176	189	201	213	225	231	237	248	260
18	89	103	117	131	144	158	171	184	197	210	223	235	241	247	259	271
19	94	109	124	138	153	167	181	195	209	223	236	249	256	263	276	288
19,6	97	112	128	143	158	173	187	202	216	230	244	258	265	272	285	299
20	99	115	130	146	161	176	191	206	221	235	250	264	271	278	292	305
21	104	121	137	153	170	186	202	217	233	248	263	278	286	293	308	322
21,25	105	122	139	155	172	188	204	220	236	251	267	282	289	297	312	327
22	109	126	144	161	178	195	212	228	245	261	277	293	301	308	324	339
22,4	111	129	147	164	182	199	216	233	249	266	282	298	307	315	330	346
22,5	111	129	147	165	182	200	217	234	251	267	284	300	308	316	332	348
23	114	132	151	169	187	204	222	239	257	274	290	307	315	324	340	356
23,5	117	135	154	173	191	209	227	245	262	280	297	314	323	331	348	365
24	119	238	157	176	195	214	232	250	268	286	304	322	330	339	356	373
24,7	123	143	162	182	201	220	239	258	277	295	314	332	341	350	367	385
25	124	144	164	184	204	223	242	261	280	299	318	336	345	354	372	390
25,4		147	167	187	207	227	246	266	285	304	323	342	351	360	379	397
26		150	171	192	212	232	252	272	292	312	331	350	360	369	388	407
27		156	178	199	221	242	263	283	304	324	345	365	375	385	405	424
28		162	185	207	229	251	273	294	316	337	358	379	390	400	421	441
30		174	198	222	246	270	293	316	340	363	385	408	419	431	453	475
31		180	205	230	254	279	303	328	352	375	399	423	434	446	469	492
31,65	158	184	209	235	260	285	310	335	359	384	408	432	444	456	479	503
32			212	237	263	288	314	339	363	388	413	437	449	461	485	509
33			219	245	271	298	324	350	375	401	426	451	464	476	501	526
33,55			222	249	276	303	329	356	382	408	434	459	472	485	510	535
34			225	253	280	307	334	361	387	414	440	466	479	492	517	543
35			232	260	288	316	344	372	399	426	453	480	494	507	533	560
35,5			235	264	293	321	349	377	405	433	460	487	501	515	542	568
36			239	268	297	326	354	383	411	439	467	495	508	522	550	577
37,7			250	281	311	341	372	401	431	461	490	519	534	548	577	606
38			252	283	314	344	375	405	435	464	494	523	538	553	582	611
40			266	298	331	363	395	427	458	490	521	552	568	583	614	645
42				314	348	382	415	449	482	515	548	581	597	614	646	679
44					365	400	436	471	506	541	575	610	627	644	678	713
45					373	410	446	482	518	553	589	624	642	660	695	729
48					399	438	476	515	553	592	630	668	687	705	743	780
50					416	456	497	537	577	617	657	696	716	736	775	814
50,8					422	464	505	546	587	627	668	708	728	748	788	828
52							517	559	601	643	684	725	746	766	807	848
55							548	592	637	681	725	769	790	812	856	899
56							558	603	648	693	738	783	805	828	872	916
57							568	614	660	706	752	797	820	843	888	933
60							599	647	696	744	793	841	865	889	936	984
64							639	691	743	795	847	898	924	950	1001	1052
68							680	736	791	846	901	956	983	1011	1065	1120
70							700	758	815	872	928	985	1013	1041	1098	1154
72							721	780	838	897	955	1014	1043	1072	1130	1188
80			537	604	670	736	802	868	933	999	1064	1129	1162	1194	1259	1323
Weights (g/m) are calculated assuming specific gravity to be equal to 2.7 and are indicative only.

a. Dimensions
The dimensions and the tolerances are not valid for the first 100 mm of both tube-ends	Circular tubes
	Dimension tolerance
	8 < D		≤ 15		± 0,10 mm	Including ovality
	15 < D		≤ 40		± 0,12 mm
	40 < D		≤ 60		± 0,15 mm
	60 < D		≤ 80		± 0,20 mm
	Shaped tubes
	Dimension tolerance
		B o H ≤ 15		=	± 0,08 mm
	15 <	B o H ≤ 30			± 0,10 mm
	30 <	B o H ≤ 50			± 0,12 mm
	50 <	B o H ≤ 70			± 0,15 mm
	70 <	B o H			± 0,20 mm
	Flatness tolerance
		B o H ≤ 15		y max =	± 0,05 mm
	15 <	B o H ≤ 30			± 0,10 mm
	30 <	B o H ≤ 50			± 0,20 mm
	50 <	B o H ≤ 70			± 0,30 mm
	70 <	B o H			± 0,40 mm
	Key: ①, ② measuring-point s
b. Thickness
	0,5 ≤ t ≤ 1,0			± 0,05 mm
	1,0 < t ≤ 2,5			± 0,08 mm
c. Length
	Mill lenght
	4000 <	L	< 8000	– 0 + 50 mm
	Cut lenght
		L	< 1000		± 1,0 mm
	1000 ≤	L	< 3000		± 1,5 mm
	3000 ≤	L	< 7000		± 2,0 mm
	7000 ≤	L			± 3,0 mm
d. Straightness
	L ≤ 1000		F max	=	1,6 mm
	L > 1000		F max	<=	1,6 mm x L